Connection And Operating Elements; Hex-Code Switch Coding; Operating Indicators (Leds) - IFM Electronic CR2032 Handbuch

C M M
OMPACT ODULE ETAL
CR2032
Connecting and operating elements

Hex-code switch coding

Operating states (LEDs)
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen
34
PAGE
CR2032
1
5
4
2
5
3
CAGE CLAMP
connection clamps
Switch Position
S1
Baud rate
S2
Node ID
H
S3
Node ID
L
LED Status
PWR (green)
2.0 Hz
DIA (red)
IN (yellow)
2.0 Hz
OUT (yellow)
We reserve the right to make technical alterations without prior notice.
Technical data
2
3 1 2
1
CAN in CAN out
4
PWR DIA
®
1 2 3 4 5 6 7
CAN GND +VBB
S1 S2 S3
Description
0 1000 Kbits/s
1 800 Kbits/s
2 500 Kbits/s
3 250 Kbits/s
4 125 Kbits/s
5 100 Kbits/s
6 50 Kbits/s
7 20 Kbits/s
8...E not defined
F adjustment via object directory (default)
0...7 high nibble, e.g. 20 hex (= 32 dec)
F adjustment via object directory (default)
0...E low nibble, e.g. 20 hex (= 32 dec)
F adjustment via object directory (default)
Description
OFF no supply voltage
ON module in stand-by mode
CANopen status: PREOPERATIONAL / PREPARED
outputs = OFF
module active
CANopen status: OPERATIONAL
outputs are updated
OFF communication OK
ON communication disturbed
• node guard / heartbeat error
(if node guarding / heartbeat is activated)
• no synch objects
(if synch monitoring is activated)
ON binary output switched
diagnosis failure
ON binary output: output switched (ON)
analogue output: PWM preset value ≠ 0
Jumper headers
upon delivery:
3+4 / 5+6+7
Hex-coded
rotary switch
CR2032 / page 2 14.08.2014