Kärcher MIC 26C Bedienungsanleitung Seite 50

5.11 Operating lever function (for device with protective bar)
5.11.1 Function control lever A
1
0 Resting position
1 Attachments connected to 2.PTO forward, lever
snaps in place
2 Attachments connected to 2.PTO reverse, lever
snaps in place
3 Forward travel direction
5.11.2 Function control lever B
0 Resting position
1 Front power lift is lowered, lever does not snap in
place
CAUTION
Risk of damage! In this lever position the upgrade kit
(option) can not evade ground unevenness.
2 The front power lift is lowered and is in the floating
position, working equipment follows the ground (e.g.
broom), lever snaps in place
3 Front power lift is raised, lever does not snap in
place
4 Forward travel direction
50
0
2
3
5.11.3 Function control lever C
1
0 Resting position
1 Attachments connected to AUX 1 towards the front,
lever does not snap in place
2 Attachments connected to AUX 1 towards the rear,
lever does not snap in place
3 Forward travel direction
5.11.4 Function control lever D
1
0 Resting position
1 Attachments connected to AUX 2 towards the front,
lever does not snap in place
2 Attachments connected to AUX 2 towards the rear,
lever does not snap in place
3 Forward travel direction
13
-
EN
0
2
3
0
2
3