Kärcher MIC 26C Bedienungsanleitung Seite 69

10.5.21 Lubricate the machine
Illustration is symbolic
1 V-belt
CAUTION
Risk of functional disturbances. Do not let the V-belts get
in contact with the grease.
 Lubricate the grease nipples marked with an arrow with
the grease gun.
 Lubricate the grease nipples marked with "*" arrows pri-
or to starting work daily.
 Carefully lubricate all moving parts, such as locking and
safety levers, from time to time.
 Use high quality multi-purpose grease and use grease
gun to lubricate.
10.5.22 Checking the V-Belt
Check the V-belts on the radiator fan of the engine.
10.5.23 Maintaining the wiper
 only device with driver cabin
1 Spray nozzle
2 Screw
Clean/ set the spray nozzles:
 Clean the spray nozzle openings using a wire.
 Adjust the spraying direction by turning the spray head
with a wire.
Change the wiper blades:
 Loosen the screw.
 Change the wiper blade.
32
-
EN 69