orbit controls OCM642 Betriebsanleitung Seite 55

OCM642 Programmierbare Widerstandsdekade
:SYSTem:DATE
Syntax:
:SYSTem:DATE <DNPD>,<DNPD>,<DNPD>
:SYSTem:DATE?
Description:
This commands allows to change system device date.
Parameters:
<DNPD>
<DNPD>
<DNPD>
Remarks:
Overlapped command
Example:
SYST:DATE 2012,12,31
SYST:DATE? Response: 2012,12,31
:SYSTem:ERRor[:NEXT]?
Syntax:
:SYSTem:ERRor[:NEXT]?
Description:
This command reads SCPI error (maximum 32) that occurred at first. If number
of SCPI errors exceed 32, error -350 "Queue overflow" is returned. For all
available error codes and messages see "SCPI Error codes" table. Error queue
is cleared by reading all errors or by issuing *CLS command.
Parameters:
<DNPD>
<SPD>
Remarks:
Overlapped command
Example:
SYST:ERR? Response: -300,"Device error"
:SYSTem:KEY
Syntax:
:SYSTem:KEY <DNPD>
:SYSTem:KEY?
Description:
This command allows send key code to the device the same way the user can
press keys on front panel. Query returns last pressed key.
55
Year, Range 2000 ... 2063
Month, Range 1 ... 12
Day, Range 1 ... 31
Error code
Quoted error message
Orbit Controls AG
Betriebsanleitung