orbit controls OCM642 Betriebsanleitung Seite 38

Orbit Controls AG
:DISPlay:BRIGhtness
Syntax:
:DISPlay:BRIGhtness <DNPD>
:DISPlay:BRIGhtness?
Description:
This command sets brightness of device display.
Parameters:
<DNPD>
Remarks:
Overlapped command
Value is not affected by reset
Example:
DISP:BRIG 1.0
DISP:BRIG? Response: 1.000000E+00
:DISPlay:LANGuage
Syntax:
:DISPlay:LANGuage <CPD>
:DISPlay:LANGuage?
Description:
This command sets language that is used on device display.
Parameters:
<CPD>
·ENGLish
Remarks:
Overlapped command
Value is not affected by reset
Example:
DISP:LANG ENGL
DISP:LANG? Response: ENGL
:OUTPut:SHORt
Syntax:
:OUTPut:SHORt <BOOL>
:OUTPut:SHORt?
Description:
This command turns on short function. "Short" is activated only if output
terminals are switched on (see OUTP:STAT command).
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks:
Overlapped command
Value is set to default after reset
Example:
OUTP:SHOR ON
OUTP ON
OUTP:SHOR? Response: 1
Betriebsanleitung
OCM642 Programmierbare Widerstandsdekade
Range 0.0 ... 1.0 (default 1.0), 0.0 – Min, 1.0 – Max brightness
{ENGLish} (default ENGL)
english version
{ON|OFF|1|0} (default 0)
short is set if output is on
resistance is set if output is on
same as ON
same as OFF
38