orbit controls OCM642 Betriebsanleitung Seite 49

OCM642 Programmierbare Widerstandsdekade
:STATus:OPERation:NTRansition
Syntax:
:STATus:OPERation:NTRansition <DNPD>
:STATus:OPERation:NTRansition?
Description:
This comman allows set Operation Negative Transition Register. It is a decimal
value which corresponds to the binary-weighted sum of all bits set in the register.
Setting a bit in the negative transition filter shall cause a 1 to 0 transition in the
corresponding bit of the associated condition register to cause a 1 to be written
in the associated bit of the corresponding event register.
Parameters:
<DNPD>
Remarks:
Overlapped command
Example:
STAT:OPER:NTR 2
STAT:OPER:NTR? Response: 2
:STATus:OPERation:PTRansition
Syntax:
:STATus:OPERation:PTRansition <DNPD>
:STATus:OPERation:PTRansition?
Description:
This comman allows set Operation Positive Transition Register. It is a decimal
value which corresponds to the binary-weighted sum of all bits set in the register.
Setting a bit in the positive transition filter shall cause a 0 to 1 transition in the
corresponding bit of the associated condition register to cause a 1 to be written
in the associated bit of the corresponding event register.
Parameters:
<DNPD>
Remarks:
Overlapped command
Example:
STAT:OPER:PTR 1.0
STAT:OPER:PTR? Response: 1.000000E+00
:STATus:QUEStionable:CONDition
Syntax:
:STATus:QUEStionable:CONDition?
Description:
This query returns the content of Questionable Condition register. It is a decimal
value which corresponds to the binary-weighted sum of all bits in the register.
Register is not cleared after this query. The response to the query therefore
represents an instantaneous 'Snapshot' of the register state, at the time that the
query was accepted.
Parameters:
<DNPD>
Remarks:
Overlapped command
Example:
STAT:QUES:COND? Response: 2
49
Operation Negative Transition Register, Range 0... 32767
Operation Positive Transition Register, Range 0 ... 32767
Questionable Condition register
Orbit Controls AG
Betriebsanleitung