orbit controls OCM642 Betriebsanleitung Seite 37

OCM642 Programmierbare Widerstandsdekade
:CALibration:SECure:EXIT
Syntax:
:CALibration:SECure:EXIT
Description:
This command exits calibration mode and access.
Parameters:
None
Remarks:
Overlapped command
Example:
CAL:SEC:EXIT
:DISPlay:ANNotation:CLOCk:DATE:FORMat
Syntax:
:DISPlay:ANNotation:CLOCk:DATE:FORMat <CPD>
:DISPlay:ANNotation:CLOCk:DATE:FORMat?
Description:
This command sets format of date displayed on device screen.
Parameters:
<CPD>
·MDYS
·MDYA
·DMYS
·DMYO
·DMYA
·YMDS
·YMDO
Remarks:
Overlapped command
Value is not affected by reset
Example:
DISP:ANN:CLOC:DATE:FORM MDYS
DISP:ANN:CLOC:DATE:FORM? Response: MDYS
:DISPlay:ANNotation:CLOCk[:STATe]
Syntax:
:DISPlay:ANNotation:CLOCk[:STATe] <BOOL>
:DISPlay:ANNotation:CLOCk[:STATe]?
Description:
This command enables/disables showing actual time in title on device screen
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks:
Overlapped command
Value is not affected by reset
Example:
DISP:ANN:CLOC ON
DISP:ANN:CLOC? Response: 1
37
{MDYS|MDYA|DMYS|DMYO|DMYA|YMDS|YMDO} (default MDYS)
M/D/Y format
M-D-Y format
D/M/Y format
D.M.Y format
D-M-Y format
Y/M/D format
Y.M.D format
{ON|OFF|1|0} (default 1)
actual time is shown
actual time is hidden
same as ON
same as OFF
(M-month, D-day, Y-year)
Orbit Controls AG
Betriebsanleitung