orbit controls OCM642 Betriebsanleitung Seite 54

Orbit Controls AG
:SYSTem:COMMunicate:LAN:DHCP
Syntax:
:SYSTem:COMMunicate:LAN:DHCP <BOOL>
:SYSTem:COMMunicate:LAN:DHCP?
Description:
This command allows switch On/Off DHCP.
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:DHCP ON
SYST:COMM:LAN:DHCP? Response: 1
:SYSTem:COMMunicate:RESTart
Syntax:
:SYSTem:COMMunicate:RESTart
Description:
This command will restart communication interface. It will take several seconds.
During this period device will not respond to any commands. Restart is needed
for all LAN setting changes.
Parameters:
None
Remarks: Overlapped command
Example: SYST:COMM:REST
:SYSTem:COMMunicate:SERial:BAUD
Syntax:
:SYSTem:COMMunicate:SERial:BAUD <CPD>
:SYSTem:COMMunicate:SERial:BAUD?
Description:
This command allows changing RS232 transfer rate.
Parameters:
<CPD>
·1200
·2400
·4800
·9600
·19200
·38400
·57600
·115200
Remarks:
Overlapped command
Value is not affected by reset
Example: SYST:COMM:SER:BAUD 9600
SYST:COMM:SER:BAUD? Response: 9600
Betriebsanleitung
OCM642 Programmierbare Widerstandsdekade
{ON|OFF|1|0} (default 1)
DHCP is On
DHCP is Off
same as ON
same as OFF
{1200|2400|4800|9600|19200|38400|57600|115200}
9600)
1200 Bd
2400 Bd
4800 Bd
9600 Bd
19200 Bd
38400 Bd
57600 Bd
115200 Bd
(default
54