orbit controls OCM642 Betriebsanleitung Seite 43

OCM642 Programmierbare Widerstandsdekade
[:SOURce]:TIMing:PRESet<IND_PRESET>:NAME
Syntax:
[:SOURce]:TIMing:PRESet<IND_PRESET>:NAME <SPD>
[:SOURce]:TIMing:PRESet<IND_PRESET>:NAME?
Description:
This command allows reading and changing preset name. The preset must exist
before its name is changed or read.
Parameters:
<IND_PRESET> Range 1 ... Preset count (1 - if omitted)
<SPD>
Remarks: Overlapped command
Example: TIM:PRES2:NAME "TIME 1s"
TIM:PRES2:NAME? Response: "TIME 1s"
[:SOURce]:TIMing:PRESet<IND_PRESET>:PDELete
Syntax:
[:SOURce]:TIMing:PRESet<IND_PRESET>:PDELete
Description:
This command allows deleting existing preset. The preset will be deleted
including particular timing table.
Parameters:
<IND_PRESET>
Remarks:
Overlapped command
Example:
TIM:PRES1:PDEL
[:SOURce]:TIMing:PRESet<IND_PRESET>:RAPPend
Syntax:
[:SOURce]:TIMing:PRESet<IND_PRESET>:RAPPend <SPD>
Description:
This command appends new record at the end of timing table.
Parameters:
<IND_PRESET> Range 1 ... 255 (1 - if omitted)
<SPD>
Remarks: Overlapped command
Example: TIM:PRES1:RAPP "0.5,220.0"
[:SOURce]:TIMing:PRESet<IND_PRESET>:RCOunt?
Syntax:
[:SOURce]:TIMing:PRESet<IND_PRESET>:RCOunt?
Description:
This commands returns actual number of records in timing table.
Parameters:
<IND_PRESET> Range 1 ... Preset count (1 - if omitted)
<DNPD>
Remarks: Overlapped command
Example: TIM:PRES1:RCO? Response: 6
43
Quoted preset name. Upper alpha, lower alpha, digits and
spaces are allowable. Maximum string size is 10 characters.
Range 1 ... Preset count (1 - if omitted)
Quoted string representing amplitude. The amplitude consists
of two float numeric fields separated by comma. The first one
represents timing interval in seconds and the second one
amplitude in Ohms.
Integer value representing number of records
Orbit Controls AG
Betriebsanleitung