Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OCM642 Programmierbare Widerstandsdekade
in the corresponding bit of the associated condition register to cause a 1 to be
written in the associated bit of the corresponding event register.
Parameters:
<DNPD>
Remarks:
Overlapped command
Example: STAT:QUES:PTR 2
STAT:QUES:PTR? Response: 2
:SYSTem:BEEPer:STATe
Syntax:
:SYSTem:BEEPer:STATe <BOOL>
:SYSTem:BEEPer:STATe?
Description:
This command sets state of device beeper.
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks: Overlapped command
Value is not affected by reset
Example: SYST:BEEP:STAT ON
SYST:BEEP:STAT? Response: 1
:SYSTem:BEEPer:VOLume
Syntax:
:SYSTem:BEEPer:VOLume <DNPD>
:SYSTem:BEEPer:VOLume?
Description:
This command sets the system device beeper volume.
Parameters:
<DNPD>
Remarks: Overlapped command
Value is not affected by reset
Example: SYST:BEEP:VOL 0.2
SYST:BEEP:VOL? Response: 2.000000E-01
:SYSTem:COMMunicate:BUS
Syntax:
:SYSTem:COMMunicate:BUS <CPD>
:SYSTem:COMMunicate:BUS?
Description:
This command selects communication interface.
Parameters:
<CPD>
·SERial
·GPIB
·USB
·LAN
Remarks: Sequential command
Value is not affected by reset
Example: SYST:COMM:BUS SER
SYST:COMM:BUS? Response: SER
51
Questionable Positive Transition Register, Range 0... 32767
{ON|OFF|1|0} (default 1)
device system beeper is enabled
device system beeper is disabled
same as ON
same as OFF
Range 0.0 ... 1.0 (Max. volume) (default 0.2)
{SERial|GPIB|USB|LAN} (default SER)
RS232 interface
GPIB interface
USB interface
LAN interface
Orbit Controls AG
Betriebsanleitung
Werbung
Inhaltsverzeichnis
