Weidmuller CUTFIX PRO Originalbetriebsanleitung Seite 49

7.5 Clean the working area
The working area includes:
– Wire entry tube (Figure 7.2, 1)
– Feed rollers (Figure 7.2, 2)
– Cutting area (Figure 7.2, 3)
– Slide (Figure 7.2, 4)
1 2
Figure 7.2 Clean the working area
► Make sure that the machine is de-energised (see chap-
ter 7.1).
► Remove the protective cover (see chapter 7.4).
► To remove wire residues from the feeding tube, insert a
long wire and push the residues out with it.
► Remove dust and cutting residues with a brush or use a
dust collector.
► Refit the protective cover.
2819930000/02/06.2022
3 4
Cleaning and servicing the machine
49