Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Some settings can be adjusted by arrow buttons. Some
functions can be enabled or disabled by setting or remo-
ving a tick. Some settings can be adjusted using a slider.
Figure 5.3 Setting options
► Tap the arrow buttons until the desired value is reached.
► Enable or disable a function by tapping onto the control.
The tick indicates that the function is active.
► Tap the slider and move it into the desired position.
5.2 Menu overview
Figure 5.4 Starting page with all menus enabled
2819930000/02/06.2022
Menu
Functions
– Entering and starting a processing
job directly
Quickstart
General settings
– Device
– Setting the volume of the touch
display
Settings
– Setting the screensaver time
– External communication
– Baud rate RS232
– Options
– Setting the quickstart as starting
page
– Changing the language
– Motor
– System
– Times
– Job list
– Delete after process
– Additional cross sections
– Automatic processing
– Additional information
Settings Feeder
– Enable or disable the feeder
– Changing general feeder settings
Motor reference (Service only)
Service (Service only)
– Changing the user type
– Changing the reset settings
– Changing user rights (Setter and
Service only)
User
Displaying all projects
– Starting projects
– Creating, editing or deleting projects
Joblist
Setting the feeder if present
Feeder
System
– Displaying information about the
machine and the operating software
– Resetting daily values
Info
– Displaying counter values
Errors
– Displaying the error list
Service (Service only)
Setting up the machine
37
Werbung
