Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating the machine
6.2 Creating a project in the joblist
Prerequisite: You are logged in as Setter.
You can create as many projects as you like. In each pro-
ject you can define several processing jobs. As soon as a
project is started, all jobs of this project are processed.
► Open the menu Joblist.
Figure 6.3 Creating a new project
► Tap New +.
► Enter a name for the new project.
► Apply the input.
If a feeder is connected and active, the assignment of the
feeder is displayed.
Figure 6.4 Feeder assignment
► Tap the slot that shall be used for the new job.
► Tap New Job.
► Enter the desired lenght and the desired number of
pieces.
► Tap Save.
46
Figure 6.5 Creating a project
► Enter all information for the desired processing job.
► Tap Save to save the job in the project.
► For creating another job, tap New Job +.
► After you have defined all jobs for the project, you can
directly start the project or leave the menu.
6.3 Changing a job or a project
► Open the menu Joblist.
► Tap the project to be changed.
► Tap Edit.
► Tap New Job +, to add a job to a project
or
► Tap the job to be changed.
► If you want to redefine an existing job, tap Empty.
► If you want to change single information of an existing
job, tap the respective values directly to change them.
► Tap Save.
The changed job is saved and thereby the project is saved
automatically.
6.4 Deleting a job or a project
The deletion is carried out immediately without
prompting and cannot be reversed!
► Open the menu Joblist.
► To delete a project, tap the project to be deleted.
► Tap Delete.
The project is deleted from the joblist.
► To delete a job from a project, open the desired project.
► Tap the job to be deleted.
► Tap Delete.
The job is deleted from the project.
2819930000/02/06.2022
Werbung
