san ignacio SG-1524 Bedienungsanleitung Seite 18

5.Clean
Please remove the working valve through loose nut by coin until lid temperature
cool down. (Fig.12)
• Note: do not remove the silicone ring from parts when you
put valve under water.
Ⅵ. Trouble shooting
If any abnormal phenomenon been found, you shall turn off the fire immediately
and take the cooker to a level place and shower the cooker with water slowly to
reduce the temperature and the pressure. Find the reason and solve the problem
with the table below.
Fig.12
33
Problem
Steam comes out from the
underside of the lid.
1.Sealing ring is dirty.
2.Sealing ring is too old.
Lid cannot fix properly. The shape of the lid changed.
Steam and liquid leaks from the
safety valve suddenly.
1. The releasing hole of pressure
regulator is obstructed. The
safety function of the safety valve
is working.
Steam and liquid leaks from the
releasing hole of second safety
1. The releasing hole of
valve suddenly.
pressure regulator is
obstructed.
2. The safety valve has lost its
function.
Ⅶ. Maintenance
1. The cooker should be cleaned before first time using.
• Maintenance of the whole cooker.
• Clear away the dirt.
• Then wipe off the water and keep the cooker dry.
• Do not scrape the cooker surface with hard material such as metal to avoid
abrasion.
• Do not touch the cooker with other kinds of metal to avoid electrochemical
corrosion.
• Do not store food inside the cooker for a long while.
Reason Solution
1.Clean the sealing ring,
cooker mouth and lid.
2.Change the sealing ring.
Change the lid.
1. Take the cooker away
from the fire. After it is
cool, take down the
pressure regulator and
clean the releasing hole.
1. Take the cooker away
from the fire. After it is
cool, take down the
pressure regulator and
clean the releasing hole.
2. Change safely open-
preventing valve.
34