Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11
EDIT & STORE |
N
"Gs
INITIAL
СОНАУ
you
press
this
key,
it alternates
between
"1ST
nation of the new data (range: 31 — 90). This number will
DLY"
and
"1ST
LEVEL"
(as displayed on the
flash on the Memory LED. If you have typed in a wrong
number,
press
CLEAR
to zero the LED,
and type in
another number.
3. Press STORE to store the edited data. The LED will stop
flashing, indicating that storage has taken place.
NOTE:
If you have tried to store data in the preset pro-
grams (numbers 1 thru 30) the LED will continue
flashing,
as
these
programs
are
protected.
Press
CLEAR and type in a new number.
LCD), allowing you to set the values of the delay
and level of the first reflection.
|
2. Press numeric keys to type in the new value of the para-
meter. The new value will flash on the LCD. If you make
а mistake, press the CLEAR
key to zero the LCD, and
type in new data.
3. Press ENTER
to enter the new data. The LCD will stop
flashing. М you have tried to enter a value that is higher
Werbung
