Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Using dowels, place two
screws 101.6 mm (10,16 cm)
apart at the desired position
of a wall.
• The screw head can have a
diameter of 7 mm.
• Leave the screw heads protru-
ding at a distance of approx.
10 mm from the wall.
• With the openings of the wall
bracket, you can attach the
charger (5) to the two screws
and pull the charger down
until it stops.
When drilling, be careful
not to damage any supply
lines. Use suitable search devices
to find these or consult an instal-
lation plan for guidance. Contact
with electrical cables can lead to
electric shock and fire. Contact
with a gas line can result in an
explosion. Damage to a water
pipe can lead to property dama-
ge and electric shock.
Cleaning
Clean the charger with a dry cloth
or with a paintbrush. Do not use
water or metal objects.
Maintenance
The equipment is maintenance
free.
Disposal/environ
mental protection
The device, accessories and
packaging should be properly
recycled.
Electrical devices do not
belong in domestic waste.
Directive 2012/19/EU on waste
electrical and electronic equip-
ment: Consumers are legally
obliged to recycle electrical and
electronic equipment in an envi-
ronmentally sound manner at the
end of its life. In this way, envi-
ronmentally friendly and resource-
saving recycling is ensured.
GB MT
37
Werbung
