Werbung
Verfügbare Sprachen
Verfügbare Sprachen
marks by pressing them.
8. Now press the
the same color as the set
check mark.
9. Enter a WLAN name and
the corresponding password
to connect the charger to the
WLAN.
10. Confirm your entry.
The charger is now connec-
ted to the app. You can re-
cognize a successful connec-
tion by the fact that the
WLAN indicator (9) lights
up blue continuously.
11. Confirm the successful
connection with "Finish".
The charger is now listed
in the
tab and can be
selected.
If you have already connec-
ted other devices to the app:
5. On the tab
in the upper right. The
app scans the area for avai-
lable devices and indicates
if available devices have
been found.
, that has
, select the
If this is not the case,
read on if possible
6. Proceed as with
point 7.
If a list of available devices
is not automatically suggested
to you:
If the charger is not suggested
automatical suggested, follow
these steps:
5. On the tab
in the upper right.
6. Select "Other" in the bar on
the left.
7. Select "Lidl Smart charger".
8. Follow the instructions in the
app.
Upgrading the firmware
can change the features
of the app.
If you have already pai-
red the device with the
Lidl Home App and press the
ECO button (8) and 60% button
(7) again for 5 seconds, the de-
vice switches to pairing mode
GB MT
.
from
, select the
33
Werbung
