Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB MT
the battery charger from
the mains before clea-
ning the charger.
• Do not use any accesso-
ries that are not recom-
mended by PARKSIDE.
This can result in electric
shock or fire.
Charging Process
Do not expose the battery
to extreme conditions such
as heat or impact. Risk of injury
from escaping electrolytic soluti-
on! After eye/skin contact, rinse
the affected areas with water or
a neutraliser and consult a doctor.
Charge the battery in a
dry room only. Prior to at-
taching the charger, check that
the battery's outer surface is
clean and dry. There is a risk of
injury due to electric shock.
To recharge batteries of
the (Parkside) X 20 V
Team series, only use a charger
belonging to the (Parkside)
X 20 V Team series.
30
• Charge the battery before the
first time of use.
• Always take heed of the
applicable safety instructions
as well as the environmental
protection regulations and
information.
Checking the charge
status of the battery
The battery charge status indicator
(3) on the battery shows the char-
ge status of the battery (4). Press
the button for the charge level in-
dicator (2). The charge level of the
battery is indicated by illumination
of the corresponding LED light.
3 LEDs illuminated (red, orange
and green): Battery charged
2 LEDs illuminated (red and oran-
ge): Battery partially charged
1 LED illuminated (red):Battery
needs to be charged
Charge the battery (4)
when only the red LED on
the charge level indicator (3) is
illuminated.
Werbung
