Herunterladen Diese Seite drucken

Parkside PBSA 20-Li A1 Originalbetriebsanleitung Seite 22

Vorschau ausblenden Andere Handbücher für PBSA 20-Li A1:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
Meaning of the safety
information
 DANGER! If you do not observe this
safety instruction, an accident will occur.
The result of which is severe bodily injury
or death.
 WARNING! If you do not observe
this safety instruction, an accident may
occur. The result of which is likely severe
bodily injury or death.
 CAUTION! If you do not observe this
safety instruction, an accident will occur.
The result of which is likely minor or mod-
erate bodily injury.
NOTICE! If you do not observe this safety
instruction, an accident will occur. The res-
ult of which is possible damage to prop-
erty.
Pictograms and symbols
Symbols on the device
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Observe the operating instructions
Electrical devices must not be dis-
posed of with domestic waste.
Symbols used in the instruction
manual
Caution!
General Power Tool Safety
Warnings
 WARNING! Read all safety
warnings, instructions, illustra-
tions and specifications provided
22
with this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable li-
quids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmod-
ified plugs and matching outlets will re-
duce risk of electric shock.
b) Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators, ranges
and refrigerators. There is an in-
creased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water en-
tering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Nev-
er use the cord for carrying,

Werbung

loading