Parkside PBSA 20-Li A1 Originalbetriebsanleitung Seite 20

GB
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Drill Driver 20V
• Drill bit (50 mm: PH2, PZ2)
• Storage case
• Translation of the original instructions
• Rechargeable battery and charger with
instruction manual
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Drill chuck opening
2 Quick-release chuck
3 Torque adjustment ring
4 On/Off switch
5 Rotation direction switch
6 Handle (Insulated gripping surface)
7 Battery holder
8 Charge level indicator
9 Rechargeable battery
10 Battery release
11 LED work light
12 Drill bit
13 Battery charger
20
Description of functions
The drill driver is equipped with a slip
clutch that decouples the drive from the
spindle when a preselected maximum
torque is reached.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Drill Driver 20V
............................... PBSA 20-Li A1
Rated voltage U ............................. 20 V ⎓
Weight with battery (20 V, 2 Ah) ... 1.3 kg
No-load rotation speed n
Max. torque .................................... 35 Nm
Chuck capacity ....................... 0.8–10 mm
Max. drilling diameter
–wood ............................................. 25 mm
–steel ............................................... 10 mm
Sound pressure level (L
...................................... 75.6 dB; K
Sound power level (L
..................................... 86.6 dB; K
Vibration (a ) ............................. ≤2.5 m/s²
h
Rechargeable battery .........................Li-Ion
Temperature ................................... ≤50 °C
– Charging ................................4 – 40 °C
– Operation ......................... −20 – 50 °C
– Storage .................................. 0 – 45 °C
Lidl Smart battery Smart PAPS 204 A1/
Smart PAPS 208 A1
– frequency band .... 2400–2483.5 MHz
– transmitted power ................... ≤ 20 dBm
Levels of noise and vibration were determ-
ined according to the standards and regu-
lations in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised
test method and can be used to compare
one power tool with another. The specified
−1
... 0–500 min
0
)
pA
=5 dB
pA
)
WA
=5 dB
WA