Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
21
15
22
14
16
23
16
24
15
17
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The protective shield has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The protective shield will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
0
255
00
FF
0
255
00
FF
0
255
00
FF
0
7
00
07
8
15
08
0F
16
23
10
17
24
47
18
2F
48
55
30
37
56
63
38
3F
64
71
40
47
72
79
48
4F
80
87
50
57
88
95
58
5F
96
255
60
FF
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
White fine
0%
100%
F
White with 16-bit resolution
Zoom
0%
100%
F
Gradual adjustment from 13 - 60°
Zoom fine
0%
100%
F
Zoom with with 16-bit resolution
Reset, display control
0%
3%
S
No function
3%
6%
S
Reset all motors
6%
9%
S
Reset only Pan/Tilt
9%
18%
No function
S
19%
22%
S
Reset other motors
22%
25%
S
Display Off
25%
28%
S
Display On
28%
31%
S
No function
31%
34%
S
No function
35%
37%
S
Hibernation
38% 100% S
No function
CAUTION!
47/52
00083593.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
