Description Of The Device; Features - EuroLite ZEITGEIST TMH-360Z INFINITY Bedienungsanleitung

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features

QCL Moving Head Washlight with unlimited PAN and TILT movement
• Equipped with 36 x 7 W quadcolor LED with RGBW colors
• Unlimited PAN/TILT movement
• Supports RDM (Remote Device Management)
• 15, 16, 17 or 24 DMX channels selectable
• Exact positioning via 16 bit PAN/TILT movement resolution, dimmer intensity, colors and zoom
• Masterdimmer
• Motorized zoom with 13°-60° beam angle
• Flicker-free projection
• Color presets
• Stepless RGBW color changing
• Strobe effect with adjustable speed
• Random strobe effect
• Automatic position correction
• Sound-controlled via built-in microphone
• Control board with graphic LC display and foil-keyboard for adjusting the DMX-starting address, PAN/TILT
reverse, reset
• The scenes can be modified via the Control Board or via an external controller and loaded into the memory
• Number of scenes can be changed individually
• Software upload by optional accessories via DMX link
• Switch-mode power supply for operation between 100 and 240 Volts
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power up to 8 devices
• DMX control via every standard DMX controller
31/52 00083593.DOC, Version 1.0