Cleaning And Maintenance - EuroLite LED TMH-80 Bedienungsanleitung

192 207 C0 CF 75% 81%
208 223 D0 DF 82% 87%
224 239 E0 EF 88% 94%
240 255 F0 FF 94% 100%
Control-channel 10 - Switching the LEDs, Strobe, Reset
Decimal Hexad. Percentage S/F
0 20 00 14 0% 8%
21 30 15 1E 8% 12%
31 200 1F C8 12% 78%
201 250 C9 FA 79% 98%
251 255 FB FF 98% 100%
Control-channel 11 - Dimmer intensity
Decimal Hexad. Percentage S/F
0 255 00 FF 0% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fan should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
S White/green
S Red/green/blue
S Green/blue/white
S Red/blue/green/white
S Neutral
S Reset
F Strobe-effect with increasing speed
F Random strobe-effect with increasing speed
S Neutral
F Gradual adjustment of the dimmer intensity from 0 to 100 %
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
31/32 00083263.DOC, Version 1.0