Dmx-Controlled Operation; Addressing The Device; Dmx-Protocol; Cleaning And Maintenance - EuroLite LED Pixel Spot 64 DMX Bedienungsanleitung

DMX-CONTROLLED OPERATION

You can control the LED Pixel Spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP switches 1 and 10 to ON. (This setting is also used to determine the
Slave device).

Addressing the device

Each device occupies 192 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP-switches.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Controlling:
After having addressed all LED Pixel Spots, you may now start operating these via your lighting controller.

DMX-protocol

Channel Attribute of the LED Number:
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
CH 9
CH 184
CH 185
CH 186
CH 187
CH 188
CH 189
CH 190
CH 191
CH 192

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
R1
G1
B1
R2
G2
B2
R3
G3
B3
.
.
R62
G62
B62
R63
G63
B63
R64
G64
B64
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
19/20 00077638.DOC, Version 1.0