Dmx-Protocol; Cleaning And Maintenance; Replacing The Fuse - EuroLite LED PAR-64 Spot Bedienungsanleitung

Occupation of the DIP-switches:
Controlling:
After having addressed all devices, you may now start operating these via your controller.

DMX-protocol

Channel DMX Value Function
1 0-255
0-10
2
11-20
0-255

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
dimmer
Blackout
Full ON (dimmable via CH1)
Strobe with increasing speed
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
%
0-100
100
100
0-100
19/20 00056563.DOC, Version 1.3