Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.3 Connecting the hob to the mains
WARNING!
Risk of electric shock!
There is a risk of fatal electric shock if the appliance
is connected by unqualified persons!
This hob may only be installed/connected and earthed
by a certified electrician in accordance with the applicable
regulations and standards!
Important notes on connection to the mains
• The installer must ensure that an easily accessible
all-pole circuit breaker (fuse) with a contact gap of at least 3 mm
is integrated into the appliance's circuit,
which complies with the applicable regulations
and ensures complete disconnection of the appliance
from the power supply in an emergency.
The earth wire must not be interrupted by the fuse in the process.
• Use the supplied mains cable for installation and only have it re-
placed with one of the same type if necessary.
• The cable must be laid in such a way that it cannot be kinked,
crushed or twisted and its temperature never exceeds 75˚C.
• Do not use adapters, reducers or branching devices to connect the
hob to the mains, as these may cause overheating and fire.
Connection sketch for the installer:
2 × 230V~, 2N~
16A
connect in box on neutral / N .
Note:
Hob blue and grey
Black on L1,
brown on L2.
blue and grey do not
disconnect!
If you are unsure,
contact customer service.
Mounting and Installation
1 × 230-240V ~
32A
Appliance is not suitable
for operation with an
EU plug!
63
Werbung
