Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting and Installation
Inserting and fixing the hob
• Place the hob on a clean, stable and smooth surface
(e.g. use the packaging as a base).
Make sure that no pressure is exerted on the elements
that protrude from the hob.
• Fit the 4 installation brackets (1) using the supplied screws (2)
and screwing them into the corresponding inspection holes (3)
on the hob base (4) as shown in the following illustration:
3
2
1
• Adjust the position of the brackets according to the
installation situation.
• Check the hob gasket for damage
and for correct positioning on the hob.
• Insert the hob into the prepared cut-out in the worktop
with the cables first and aligned centrally.
Make sure that it sits stably.
Notes:
• There are ventilation openings on the outside of the hob.
When inserting the hob, make sure that they are not blocked
by the worktop!
• When inserting the hob, make sure that its connection cable
cannot be crushed, bent or twisted!
62
5
5
4
4
1 Installation bracket
2 Screw
3 Screw hole
4 Hob base
1
5 Glass ceramic plate
2
6 Worktop
6
Werbung
