Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Timer setting with automatic switch-off of cooking zones
To set the timer so that a cooking zone is automatically
switched off after a set time of 1-99 min, proceed as follows:
• Touch a function key of the cooking zone,
for which you want to activate the switch-off timer,
to select it
and set the desired power level, if not already done.
• While the cooking zone display is flashing,
touch the timer key
• The timer display starts flashing and shows
• Use the
and
• Briefly touching the keys will change the time setting in 1-
minute increments, long touches in 10-minute incre-
ments.
• If 99 minutes are exceeded, the setting returns
to 0 minutes.
• After 5 seconds without further input, the display stops
flashing and the set time is automatically confirmed.
The countdown starts and the timer display shows the
remaining time.
To mark the selected zone, a dot flashes
next to the corresponding power display.
CAUTION!
Risk of injury and fire!
Unattended cooking can boil over,
burn and catch fire!
Do not use the timer for unattended cooking!
• After the set time has elapsed, the corresponding cooking
zone is switched off automatically.
The cooking zone display shows
the timer display shows
Note on the operation of further cooking zones
Other cooking zones remain unaffected
by the timer and stay in operation, if applicable.
.
keys to set the desired time in minutes.
(residual heat warning),
.
Operation and Setting
.
37
Werbung
