Herunterladen Diese Seite drucken

Parkside PWS 20 C2 Originalbetriebsanleitung Seite 24

Vorschau ausblenden Andere Handbücher für PWS 20 C2:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
MT
4. Press the lever for the spray function
(
15a) on the handle part to turn on
the spray function.
5. Empty the container (7) immediately
after vacuuming, as it is not designed
to store liquids (see "Cleaning/Mainte-
nance").
In case of excessive dirt or stains,
add some cleaning agent, e.g. car-
pet and upholstery cleaner (
to the water tank.
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
General Cleaning Work
Never hose the appliance
down with water. Never use
aggressive cleaning agents
or solvents. This could dam-
age the appliance.
• Remove the water tank (
empty the container (
• Clean the container (
damp cloth.
• Wash the foam filter (11) with warm
water and soap and let it dry.
• Rinse the water channels (
with fresh water.
• Replace the paper filter bag (
when full (see "Replacement parts/Ac-
cessories" for reordering).
• After finishing the cleaning work, re­
install the motor head (
water tank (
• Always check the appliance before
use for any obvious faults such as a
defective mains cable, and have these
repaired or replaced.
24
19) and
7) after use.
7) with a
13+17)
12)
4) and the
19).
Maintenance
The device is maintenance free.
Storage
1. Wind up the mains connection
cable (9) and hang it on the hook on
the motor head (4).
2. Wind the vacuum hose (16) around the
25),
motor head (4).
3. The accessory holders (8a) on the cas-
tors (8) are used to store the suction
pipes and the smaller accessories.
4. Store the appliance in a dry place (rec-
ommended ambient temperature 15 ­
30 °C) and out of reach of children.
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines must not be disposed of
with household refuse.
In accordance with the Directive
2012/19/EU on waste electrical and elec-
tronic equipment, used electrical devices
must be collected separately for disposal
and recycled in an environmentally sound
manner.
Depending on the implementation in na-
tional law, you may have the following
options:
• Return to a shop,
• Hand over to an official collection point.
For more information, please contact
your local waste management provider
or our service centre.

Werbung

loading