Parkside PWS 20 C2 Originalbetriebsanleitung Seite 19

tion flow is switched off by a float during
wet vacuuming once the waste tank is full.
The following describes the function of the
operating parts.
Technical data
Carpet Cleaner ........................ PWS 20 C2
Mains voltage (U) ..220­240 V~, 50/60 Hz
Power consumption of motor (P) ...1600 W
Suction power ..............0.16 bar (16 kPa)
Spray pressure (p) ............2 bar (200 kPa)
Fluid quantity (Q) ........................ 1 l/min
Protection class ....
Protection type ................................. IPX4
Cable length..................................7,5 m
Waste tank capacity (gross)............... 20 l
usable container volume (water) ......... 11 l
Water tank content (gross) ................... 4 l
Weight (incl. all
accessories) ......................approx. 8.5 kg
Sound pressure level
) ...................... 79 dB(A); K
(L
pA
Symbols and icons
Symbols used in the
instructions
Read the operating instruc-
tions carefully.
Hazard symbols with
information on preven-
tion of personal injury
and property damage.
Precaution symbol with in-
formation on prevention of
harm / damage.
II (Double insulation)
= 3 dB
pA
Pull out the mains plug.
Connect the machine to the
power supply.
Notice symbol with informa-
tion on how to handle the
device properly.
Symbols on the appliance
Electrical machines must not
be disposed of with house-
hold refuse.
Protection class
(Double insulation)
Turn the drain plug in the
direction of the arrow to
open
Pictograms regarding the
use of nozzles and filters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth
surfaces and hard floor sur-
faces.
Nozzle to vacuum dust and
dirt from joints and cracks.
Specific nozzle to vacuum
cushions and mattresses.
To absorb liquids.
GB MT
19