Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
MT
semble the suction pipes, press the
release (13a) on the water duct and
pull the suction pipes apart.
- Install the nozzle (
N ever vacuum without a filter!
The nozzles (
tached directly onto the handle with
air regulation (15).
Operation
Fully unwind the suction hose
(
16) before commencing work.
Switching on/off
Connect the mains plug.
Switching on the vacuum cleaner
(Permanent operation):
Move the On/Off switch (
position.
Switching off the vacuum cleaner:
Move the On/Off switch (
position.
Washer function
Switching on the washer function
1. Turn the appliance on (On/Off switch).
2. Move the pump switch (3) to position
"1".
Switching off the washer function
3. Move the pump switch (3) to position
"0".
4. Turn the appliance off (see Switching
on/off).
22
20-24) desired.
20-24) can be at-
2) to the "I"
2) to the "0"
Breaks
If you want to store away the assembled
suction equipment when you take a break,
you can plug the suction pipe into the ac-
cessory holders (8a) on the castors.
Dry vacuuming
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the ad-
ditional use of a paper filter bag
(brown).
1. Fold the side flaps on the paper filter
bag (12) down on the perforation.
2. Unfold the paper filter bag (12) com-
pletely and invert it over the internal
suction fitting of the suction connec-
tion (10).
The sealing ring on the filter bag open-
ing must completely enclosed the arm
on the suction nozzle.
A fine dirt filter bag made of micro
filter fleece is also optionally avail-
able, which can be used in place
of the included paper filter bag (see
"Replacement parts/Accessories").
Vacuuming fine dust:
Certain suction processes (e.g. sanding
paints and varnishes, drilling walls, grind-
ing or drilling hard wood) can pose a risk
due to hazardous dust.
We recommend using the following option-
al filter combination, which is available,
for fine dust (see "Spare parts/Accesso-
ries"):
Werbung
