Parkside PWS 20 C2 Originalbetriebsanleitung Seite 18

GB MT
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
The appliance is supplied with the motor
head fitted (
4). To remove the motor
head, open the fastening clips (
4 Motor head
7 Container
8 4 castors with accessory holders
11 Foam filter
12 Paper filter bag
14 Suction pipe (2 parts)
16 Suction hose
20 Floor nozzle
21 Crevice nozzle
22 Upholstery nozzle
23 Washer nozzle for cleaning up-
holstery
24 Washer nozzle with attachment
for hard surfaces
25 Carpet and upholstery cleaner
(100 ml)
­ Instruction Manual
Dispose of the packaging material cor-
rectly.
Overview
Housing
1 Carrying handle (not visible)
2 On/Off switch
3 Pump switch
4 Motor head with filter basket (4a)
5 Water duct connector
18
6 Fastening clip
7 Container
8 4 castors with accessory hold-
9 Mains connection cable
10 Suction connector
11 Foam filter for wet suction
12 Paper filter bag to vacuum
6). 13 Water duct at the suction pipe
13a Release
14 Suction pipe
15 Handle with air regulation
15a Lever for spray function
16 Suction hose
17 Water duct at the suction hose
18 Notch
19 Water tank
19a Water tank lid
20 Floor nozzle
21 Crevice nozzle
22 Upholstery nozzle
23 Washer nozzle for cleaning up-
24 Washer nozzle with attachment
25 Carpet and upholstery cleaner
26 Drain plug
Description of operation
The carpet cleaner is equipped with a sta-
ble stainless steel container for collecting
dirt and a separate water container for the
washer function. The castors provide good
manoeuvrability of the appliance. The suc-
ers (8a)
Filters
coarse dirt
Accessories
Nozzles
holstery
for hard surfaces
(100 ml)