Beurer BM 53 Gebrauchsanweisung Seite 37

the user's circulatory system is sufficiently at rest represent
particularly reliable results.
6.5 Displaying and deleting measured
values
User
The results of every successful measurement are saved with
the date and time. If there are more than 120 measurements,
the oldest measurements are deleted.
Press on the start screen and select the desired user using
the slider.
Average value
is displayed:
The average value of all this user's saved measured values
is displayed.
1. Press >.
is displayed:
The average value of the morning measurements for the last
7 days is displayed (morning: 5:00–9:00).
2. Press >.
is displayed:
The average value of the evening measurements for the last 7
days is displayed (evening: 18:00–20:00).
Individual measured values
1. If you press > again, the last individual measurement is
displayed (in this example, measurement 3).
2. If you press < / > again, you can view the individual meas-
ured values.
3. To switch the device off again, press
onds.
Press to exit the menu.
Deleting measured values
1. To delete all of a user's saved measured values, go to the
respective user memory.
The display shows
stored measured values of this user.
2. Press and hold < and > for approx. 5 seconds.
for /
values of the selected user are deleted.
The device switches off automatically.
Reset the device to factory settings
1. To delete all saved measured values and settings, select
the user memory.
Press >. The display shows
2. Press and hold < and > for approx. 15 seconds.
appears in the display. All data stored on the device is
deleted; the device is reset to factory settings.
The device switches off automatically.
7. CLEANING AND MAINTENANCE
• Clean the device and cuff carefully using only a slightly
damp cloth.
• Do not use any cleaning solutions or solvents.
37
for approx. 2 sec-
and the average value of all
for appears in the display. All
.