Product-Specific Safety Instructions; Intended Use - Simons Voss Technologies PegaSys 2.1 Kurzanleitung

PegaSys Authorisation reader 2.1 and
4.1 Display/keypad
2 Product-specific safety instruc-

3 Intended use

EN
tions
IMPORTANT
Cable shields required for EMC
Shielded cables can improve electromagnetic com-
patibility.
Connect the cable shields as shown in the dia-

grams.
NOTE
IO controller/connector in the protected area
The connections of the IO controller/connector are
freely accessible and can be tampered with by third
parties.
1. Always mount the IO boards in a protected area,
e.g. in a DIN device socket or the optionally avail-
able Hensel box (item no. 3050121300).
2. Do not mount the IO controller in the wall frame.
The authorisation reader reads and writes
NetworkOnCard access rights to RFID identification
media. With an IO board, it also switches a relay to
control electric strikes.
Any other use is not in accordance with the intended
purpose and is not permitted.

2. Product-specific safety instructions

27 / 64