KERN DS Betriebsanleitung Seite 105

10.3.2 Application units
When selecting an application unit (%, Pcs, mol, FFA), the required settings can be
selected right after being invoked, using the
Setting example „Percent weighing":

TDS-BA-def-2210

Press the key, wait until the display flashes.

Use button to select the unit <%>.

Put a reference weight which corresponds to 100 %.

Acknowledge by ➔-button.

Confirm the flashing weight value of the reference weight
using ➔ button.

From now on the weight of the sample will be shown in
percent based on the reference weight.
button.
37