KERN DS Betriebsanleitung Seite 101

10.2.4 Percent weighing
The application <Percent weighing> allows to check the weight of a sample in
percent, based on a reference weight.

• Using
and unit 2 (enabling the unit).
The required settings can also be defined quickly and conveniently by
pressing the
10.3.2.
TDS-BA-def-2210

Select menu setting < unit >.

Put a reference weight which corresponds to 100 %.

Acknowledge by ➔-button.

Use the navigation keys  to select the setting < % > and
confirm on ➔ button.

Confirm the flashing weight value of the reference weight
using ➔ button.

From now on the weight of the sample will be shown in
percent based on the reference weight
button, it is possible to switch over between the enabled unit 1
button (without calling up the < unit> menu), see chap.
33