10.2.5 Weighing with multiplication factor
Here you determine with which factor the weighing result (in gram) will be multiplied.
By that way, e.g. a known error factor in the weight determination can be immediately
taken into account.
The required settings can also be defined quickly and conveniently by
pressing the
10.3.2.
34
Select menu setting < unit > and confirm on ➔ button.
Use the navigation keys to select the setting < FFA >
and confirm on ➔ button.
Enter multiplication factor, numerical input
see chap. 3.2.2, the active digit flashes.
key (without calling up the < unit> menu), see chap.
TDS-BA-def-2210