KERN DS Betriebsanleitung Seite 122

Buttons
Allocate function
key
Blight
Display
background
illumination
tarerg
Taring range
ztrack
Zerotracking
Units
Units
Modes
Applications
see chap. 9.
reset
54
Not documented
mode
always
timer
No bl
5 s
10 s
30 s
Time 1 min
2 min
5 min
30 min
100%
Definition max. taring range, selectable 10% - 100%.

Numerical input, see chap. 3.2.2.
10%
Automatic zero tracking [ <3d ]
on
In the event that small quantities are removed or added
to the material to be weighed, incorrect weighing results
can be displayed due to the "stability compensation".
(e.g. slow flow of liquids from a container placed on the
off
balance, evaporating processes).
When apportioning involves small variations of weight, it
is advisable to switch off this function.
selectable
Here is determined which units must be available in menu
units, <unit>.
see chap.
Using
1
Weighing with multiplication factor, see chapter
FFA
10.2.5
mol Mol weighing mode, see chap. 10.2.6
weigh
Application <Weighing>
count
Application <Counting>
check
Application <Checkweighing>
Reset balance settings to factory settings
Background lighting of display is
switched on permanently
The background illumination is
automatically switched-off according
to the time without load change or
without operation defined in menu
item < Time >
Display background illumination
always switched off
Definition, after which time the
background illumination is
automatically switched-off without
load change or without operation.
button, you can switch over to the units set to .
TDS-BA-def-2210