KERN DS Betriebsanleitung Seite 96

9 Operating concept
From factory the balance is delivered with various applications (normal weighing,
check weighing, counting). After the first start-up the balance is in the <Weighing>
application.
In the application menu (see chap.13.2.) however, you can define, selecting an
application, in which mode the balance after switching-on has to continue working.
Either as per standard in weighing mode or e.g. as check balance or counting
balance
Selecting an application:
28

Press the TARE key and hold it until
< apcmen > is displayed.

The display changes to < wghmode > followed by
< Ptare >.

Use the TARE-button to select the menu setting<mode >
and acknowledge with ➔ button.

The last active application e.g. <weigh > is displayed.

Use the TARE-button to select the desired mode,
selectable
Weighing mode
weig h
Counting mode
count
Check mode
check

Acknowledge selection by ➔-button.
TDS-BA-def-2210