KERN DS Betriebsanleitung Seite 89

TDS-BA-def-2210
 Acknowledge selection by ➔ button.< Zero >,<Pt ld>
followed by the weight value of the adjustment weight to be
placed will be displayed.

Place the adjustment weight and confirm with ➔ button,
< wait > followed by < reMvld > will be displayed.

Once < reMvld > is displayed, remove the adjustment
weight.

After successful adjustment the balance automatically
returns to weighing mode.
In case of an adjustment error (e.g. objects on the weighing
plate) the display will show the error message <wrong>.
Switch off balance and repeat the adjustment process.
21