KERN DS Betriebsanleitung Seite 93

8.3 Zeroing
In order to obtain optimal weighing results, reset to zero the balance before weighing.
Zeroing is only possible in the range ± 2% Max.
For values greater than ± 2% maximum the error message < zlimit > is
displayed
8.4 Taring
The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.
• When the balance is unloaded the saved taring value is displayed with
negative sign.
• To delete the stored tare value, unload the weighing plate and press the
TARE key or the ZERO key.
• The taring process can be repeated any number of times, e.g. when adding
several components for a mixture (adding). The limit is reached when the
taring range capacity is full.
• Numerical input of tare (PRE-TARE)
TDS-BA-def-2210

Unload the balance

Press the ZERO key to set the balance to zero.

Put weighing container on the weighing pan.

Wait until the stability display appears
TARE key. The weight of the container is now internally
saved. Zero display and indicator <NET> will appear.
<NET> informs that all shown weight values are net
values.
), then press
25