KERN DS Betriebsanleitung Seite 109

11.2.2 Check counting
The balance allows weighing of goods within set tolerances in keeping with a
determined target quantity. With this function one can also check if the weighing
good is within a defined tolerance range.
Reaching the target value is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance marks
Optical signal:
The tolerance marks provide the following information:
Target quantity exceeds defined tolerance
Target quantity within defined tolerance
Target quantity below defined tolerance
Acoustic signal:
The acoustic signal depends on the menu setting
< setup  beeper>, see chap. 13.3.1.
TDS-BA-def-2210
).
41