Weighing Units (Unit) - KERN PCB Serie Betriebsanleitung

7.9 Weighing units (Unit)

Switch-on the balance using the
Press the key and keep it pressed until „UNIT" appears on the display.
Press shortly, the selected unit appears in the display.
Use the key to select between the different units (see table).
By pressing the key the selected weighing unit is taken over.
Gram
Kilogram
Pound
Ounce
Troy ounce
Tael Hongkong
Tael Taiwan
Grain
Pennyweight
Momme
Tola
Karat
Freely selectable factor *) FFA
*)
In order to enter an own conversion factor, press the
until „FFA" is displayed. Press the
begins to flash. Using the
key it is reduced by 1. Use the
the changes are ready, use the
key the „Freely selectable factor" is taken over as current weighing unit.
PCB-BA-e-0712
key and wait for the „0" display.
Display Conversion factor
display 1 g =
g 1.
kg 0.001
Lb 0.0022046226
oz 0.035273962
ozt 0.032150747
tlh 0.02671725
tlt 0.0266666
gn 15.43235835
dwt 0.643014931
mo 0.2667
tol 0.0857333381
ct 5
xx.xx
key to reach to the selection. The last digit
key, the displayed value is increased by 1, with the
key to jump one digit to the left. When all
key to save this value and by pressing the
key as explained above
19