KERN DS Betriebsanleitung Seite 108

Reference quantity user-defined:

2. Parts counting

With the key you can switch between piece quantity and weight display.
40

If necessary, put on and tare the weighing container.

Put on the desired quantity of reference pieces.

Invoke menu setting < ref > and confirm by ➔ button.

Use the navigation keys  to select the setting < free >
and confirm on ➔ button.

The numeric input window appears.

Enter and confirm the quantity of the placed reference
parts, numeric input see chap. 3.2.2

The balance will calculate the average item weight and
then displays the quantity of pieces.

Remove reference weight. The balance is now in piece
counting mode counting all units on the weighing plate.

If necessary, put on and tare the weighing container.

Fill the counting quantity. The piece quantity is shown
directly in the display.
TDS-BA-def-2210