KERN DS Betriebsanleitung Seite 110

Procedure:
1. Define target quantity and tolerances



42

Make sure that the scale is in counting mode and that an
average piece weight has been defined (see chap. 11.2).
If necessary, switch over with the

Call up menu setting < ref >.

Use the navigation keys  to select the setting
<target > and confirm with ➔ button.
< value > is displayed.

Confirm on ➔ button, the numeric input window appears.
The active digit is flashing.

Enter the target number of pieces (numerical input see
chap. 3.2.2) and confirm the entry.
The balance returns to the < value > menu.

Use the navigation buttons  to select setting
< Errupp >.

Confirm on ➔ button, the numeric input window appears.
The active digit is flashing.

Enter the upper tolerance (for numerical entry see chap.
3.2.2) and confirm the entry.
The balance returns to the < Errupp > menu.
key.
TDS-BA-def-2210