KERN DS Betriebsanleitung Seite 112

12 Application <Checkweighing>
12.1 Application-specific settings
Shouldn't the application <Checkweighing> already be enabled, select the
menu setting < mode  check >, see chap. 9
Call up menu:

Press the TARE key and hold it until< apcmen > is displayed.

The display changes to <chkmod> followed by <target>.

Navigation in menu see chap. 13.1
Overview:
Level 1
target
Target weighing,
limits
Checkweighing,
Ptare
PRE-TARE
mode
Application mode
44
Level 2 Description / Chapter
value
Target value entry
Upper tolerance
errupp
Lower tolerance
errlow
Reset settings to factory defaults
reset
Lower limit value, numeric input see chap. 3.2.2
limlod
Upper limit value, numeric input see chap. 3.2.2
limupp
Reset settings to factory defaults
reset
Take over the placed weight as PRE-TARE value,
actuAl
see chap. 10.2.1
Numerical input of the tare weight, see chap.
manuAl
10.2.2.
Delete PRE-TARE value
CLEAR
Weighing mode
weig h
Counting mode
count
Check mode
check
see chap. 9.
TDS-BA-def-2210