KERN DS Betriebsanleitung Seite 120

Print intfce
Data
output
sum
prmode
52
Rs232
USB-d
on
off
trig
manual
auto
cont
weight
SGLPrt
GNTPrt
LAYOUT
none
User
Reset settings to factory defaults
reset
RS 232 interface *
USB interface*
*only in connection with KUP interface
Switch on / off add-up mode,
see chap. 14.2.1
On, off
Data output by pressing the PRINT button
(see chap. 14.2.2)
On, off
Automatic data output with a steady and
positive weight value
see chap. 14.2.3
Re-output only after zero display and
stabilisation, depending on settings
< zRange >, selectable
(off, 1, 2, 3,4,5)
Continuous data output
off
Setting output interval
Speed
see chap. 14.2.4.
Zero On, off
on
0 (unloaded) also transmit
continuously
stable On, off
Transmit stable values only
Displayed weight value is
On, off
transmitted
On, off
Gross
net On, off
tare On, off
format Long (detailed measurement
protocol)
Short (standard measurement
protocol)
Standard layout
Model On, off
Output model designation of the
scale
Serial On, off
Output serial number of the scale
TDS-BA-def-2210