Operation Mode; Switch On/Off And Set Zero; Simple Weighing - KERN CPB-N Serie Betriebsanleitung

7 Operation Mode

7.1 Switch on/off and set zero

Operation
1. Switch on balance
Press ON/OFF switch and hold briefly (at the
bottom right side of the balance)
The balance will carry out a self-test
2. Set on zero

7.2 Simple weighing

Operation
Place load onto weighing plate
If the goods are heavier than the weighing
range, the display
(=Overload), and a whistle is sounded.
28
QL
will show " "
Indication
As soon as the weight display shows
"0" in all the three display windows
your balance is ready to weigh.
The zero display and the arrow
above the „→0←" symbol are
displayed.
Display
Read weighing result
If weighing values are stable the
arrow will be displayed above the
- symbol.
CPB-N / CPB-DM-BA-e-1831