Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing the seal
10.00 | ERD | Assembly and operating manual | de en | GAS 315325
1.
Press a new wiper ring (9) into the sealing ring (7).
2.
Lightly oil the sealing edge before installing.
3.
Lightly oil the O-ring (10) before installing it into the O-ring
groove.
4.
Carefully guide the sealing ring (7) over the rotary table (8)
and fasten it with the screws (6).
5.
Install the seal (5).
6.
Insert the interface plug (4) in the correct position.
7.
Fit the rotary feed-through plug (3).
8.
Tighten the screws (2).
9.
Install the blind plugs and/or screwed connections (1).
Maintenance
67
Werbung
