SCHUNK ERD-Serie Montage- Und Betriebsanleitung Seite 55

5.2 Mechanical connection
Evenness of the
mounting surface
Mounting
10.00 | ERD | Assembly and operating manual | de en | GAS 315325
The values apply to the whole mounting surface to which the
product is mounted.
Edge length
< 100
> 100
Tab.: Requirements for evenness of the mounting surface (Dimensions in mm)
The product can be mounted from three sides.
The rotary table provides a mounting surface for the planned
attachments (e.g. grippers)
1 M5 DIN 912 mounting screws
(tightening torque: 5.9 Nm)
2 Centering sleeve Ø 8 (Schunk ID no. 0331300)
3 Cylindrical pin Ø 5 m6
Permissible unevenness
< 0.02
< 0.05
Assembly
55